Horizontal Stabilizer Final Riveting
DATE: 10-10-2024 TIME: 0:45 PAGE 8-10 To end my day I riveted the HS-1004 left and right inspar ribs to the HS-1016 […]
Category: Empennage
Articles and posts related to the actual build process of the empennage will be covered in this category.
Horizontal Stabilizer Final Assembly
DATE: 10-10-2024 TIME: 1:30 PAGE 8-5,6 I continued today with the final assembly of the horizontal stabilizer and that with the front […]
Horizontal Stabilizer Final Assembly
DATE: 10-09-2024 TIME: 2:00 I had to give up on completing the rudder this morning because I am waiting for a couple […]
Closing Up The RV-10 Rudder
DATE: 10-07-2024 TIME: 1:45 I spent today finishing off riveting the 1015 B through G stiffeners together and to the forward shear […]
Closing Up The RV-10 Rudder
DATE: 10-05-2024 TIME: 0:40 After completing the priming of the horizontal stabilizer components with Sherwin Williams P60G2 I went back to closing […]
Horizontal Stabilizer Continued
DATE: 10/05/2024 TIME: 6:00 Today began with finishing off double checking the rear spar countersinking because I found one hole that was […]
Horizontal Stabilizer Continued
DATE: 10/04/2024 TIME: 4:30 As of this morning, all the prep on the horizontal stabilizer is complete but I decided to go […]
Horizontal Stabilizer Continued
DATE: 10/03/2024 TIME: 5:00 I had to wait for the additional clecos to arrive before continuing with the final size drilling of […]
Horizontal Stabilizer Continuation
DATE: 09/28/2024 TIME: 1:00 Today I spent about an hour using a soldering iron, on which I had ground the tip to […]
Horizontal Stabilizer Continued
DATE: 09-27-2024 TIME: 4:30 I was away this past weekend at the Zenith Aircraft Open Hangar Days in Mexico, Missouri and then […]