Starting Rudder Assembly
DATE: 2024-08-21 TIME: 1:30 The VS was “completed” for the time being and placed up on the storage floor out of the […]
Category: Empennage
Articles and posts related to the actual build process of the empennage will be covered in this category.
Vertical Stabilizer Closing Up
DATE: 2024-08-21 TIME: 1:00 Today EJ and I finished off the vertical stabilizer, for now, with the lower hinge, removing all the […]
Vertical Stabilizer Closing Up
DATE: 08/18/2024 – TIME: 2:10 I spent a couple of hours this afternoon closing up the vertical stabilizer in the order specified […]
Vertical Stabilizer Continuation
DATE: 2024-08-13 TIME: 3:00 Today my friend David Jackson and primed all of the vertical stabilizer parts with the Sherwin-Williams P60G2 acid […]
Vertical Stabilizer Continuation
DATE: 2024-08-12 TIME: 1:30 Most of the day today was spent cleaning and scuffing the vertical stabilizer parts getting ready to prime […]
Vertical Stabilizer Continuation
DATE: 08/06/24 – TIME: 1:00 There were a few small jobs to do before scuffing, cleaning and priming that needed to be […]
Vertical Stabilizer Continuation
DATE: 07/29/2023 – TIME: 3:00 hours So after update the web site I went back to the workshop to try and finish […]
Vertical Stabilizer Continuation
DATE: 07/27/2024 – TIME: 3:00 Friday became busy with various other things to take care of around the property so nothing got […]
Vertical Stabilizer Continuation
DATE: 07/25/2024 – TIME: 3:30 Per yesterday’s entry I sent pictures of what I had done to the nose of VS-1006, 1013 […]
Vertical Stabilizer Continuing Build
DATE: 07/24/2024 – TIME: 4:30 OK, I switched from calling it the rudder build to calling it the stabilizer build, which is […]