Vertical Stabilizer Continuation
DATE: 08/06/24 – TIME: 1:00 There were a few small jobs to do before scuffing, cleaning and priming that needed to be […]
Category: Empennage
Articles and posts related to the actual build process of the empennage will be covered in this category.
Vertical Stabilizer Continuation
DATE: 07/29/2023 – TIME: 3:00 hours So after update the web site I went back to the workshop to try and finish […]
Vertical Stabilizer Continuation
DATE: 07/27/2024 – TIME: 3:00 Friday became busy with various other things to take care of around the property so nothing got […]
Vertical Stabilizer Continuation
DATE: 07/25/2024 – TIME: 3:30 Per yesterday’s entry I sent pictures of what I had done to the nose of VS-1006, 1013 […]
Vertical Stabilizer Continuing Build
DATE: 07/24/2024 – TIME: 4:30 OK, I switched from calling it the rudder build to calling it the stabilizer build, which is […]
RV-10 Rudder Rear Spar Assembly
Date: 5/31/2024 – Total work time: 3:20 I continued the rear rudder spar assembly and disassembly because I needed to flatten the […]
RV-10 Rudder Rear Spar Cont. 1
Date: 07/22/2024 – Time: 4:00 hours Date: 07/23/2024 – Time: 2:30 hours I began by trimming the new 1014 R rear spar […]
Official Project Start – RV-10 Empennage
Total work time: 3:20 Today, May 30th 2024 @11:50 a.m. is the official start time of my project building the RV-10. I […]
Inventory Of Parts With Laser Cut Holes
This is a short video, 3 minutes, of the process of taking an inventory of all the parts in the empennage kit […]
Laser Cut Parts Review
Today was a day for a second look, a laser cut parts review. I had completed the laser cut parts review yesterday, […]